Marshall Excelsior (MER401-60) 60" Excess Flow Thermoplastic Flexible LP Hose

• Marshall Excelsior Thermoplastic Hose - Flexible thermoplastic UL and CGA approved hose
• These hoses are rated up to 350 psi working pressure with a 400 pound pull test rating
• Each hose comes with two ends and fully crimped brass ferrules
• Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system
• Hoses are suitable for high or low pressure applications

Marshall Excelsior Thermoplastic Hose - Flexible thermoplastic UL and CGA approved hose. These hoses are rated up to 350 psi working pressure with a 400 pound pull test rating. Each hose comes with two ends and fully crimped brass ferrules. Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. 1/4 inch Hose ID. All our Marshall Excelsior hoses are suitable for high or low pressure applications. 1/4 inch Thermo Pigtail, Excess Flow POL x 1/4 inch M. Inverted Flare - 60 inch OAL.